Trinamic Pd57 2 1161 Hybrid | Ofertas Componentes Eléctricos Y Electrónicos
1 
Brand: Trinamic
MPN: pd5721160tmcl
Categoría: Componentes eléctricos y electrónicos
The PANdrive™ PD-1160 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling. The PD-1160 includes a stepper motor, controller/driver electronics, and TRINAMICs sensOstep™ encoder. It can be used in many decentralized applications and has been designed for 0.55… 3.1Nm max. holding torque and 24 or 48 V DC nominal supply voltage. With its high energy efficiency from TRINAMIC’s coolStep technology cost for power consumption is kept down. The TMCL™ firmware allows for standalone operation and direct mode. Motion controller Motion profile calculation in real-time On the fly alteration of motor parameters (e.g. position, velocity, acceleration) High performance microcontroller for overall system control and serial communication protocol handling Bipolar stepper motor driver Up to 256 microsteps per full step High-efficient operation, low power dissipation Dynamic current control Integrated protection stallGuard2 feature for stall detection coolStep feature for reduced power consumption and heat dissipation Encoder sensOstep magnetic encoder (1024 increments per rotation) e.g. for step-loss detection under all operating conditions and positioning supervision Interface for connection of external incremental a/b/n encoder Interfaces RS485 interface CAN (2.0B up to 1Mbit/s) interface USB full speed (12Mbit/s) interface Step/Direction interface (optically isolated) 3 inputs for stop switches and home switch (+24V compatible) with programmable pull-up 2 general purpose inputs (+24V compatible) and 2 general purpose outputs (open collector) Incremental a/b/n encoder interface (TTL and open-collector signals supported directly) Safety features Shutdown input - driver will be disabled in hardware as long as this pin is left open or shorted to ground Separate supply voltage inputs for driver and digital logic - driver supply voltage may be switched off externally while supply for digital logic and therefore digital logic remains active Software TMCL: standalone operation or remote controlled operation, program memory (non volatile) for up to 2048 TMCL commands, and PC-based application development software TMCL-IDE available for free. Ready for CANopen Electrical and mechanical data Supply voltage: common supply voltages +12 V DC / +24 V DC / +48 V DC supported (+9 V… +51 V DC) Motor current: up to 2.8 A RMS (programmable) 0.55… 3.1Nm max. holding torque (depends on motor) With NEMA23 (57mm motor flange size) or NEMA24 (60mm motor flange size) stepper motor
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
314.6 EUR
Trinamic Pd57-2-1160-tmcl - Hybrid Stepper Motor Nema 23, 2,8 A, 9 … 51 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5721160tmcl
Categoría: Componentes eléctricos y electrónicos
The PANdrive™ PD-1160 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling. The PD-1160 includes a stepper motor, controller/driver electronics, and TRINAMICs sensOstep™ encoder. It can be used in many decentralized applications and has been designed for 0.55… 3.1Nm max. holding torque and 24 or 48 V DC nominal supply voltage. With its high energy efficiency from TRINAMIC’s coolStep technology cost for power consumption is kept down. The TMCL™ firmware allows for standalone operation and direct mode. Motion controller Motion profile calculation in real-time On the fly alteration of motor parameters (e.g. position, velocity, acceleration) High performance microcontroller for overall system control and serial communication protocol handling Bipolar stepper motor driver Up to 256 microsteps per full step High-efficient operation, low power dissipation Dynamic current control Integrated protection stallGuard2 feature for stall detection coolStep feature for reduced power consumption and heat dissipation Encoder sensOstep magnetic encoder (1024 increments per rotation) e.g. for step-loss detection under all operating conditions and positioning supervision Interface for connection of external incremental a/b/n encoder Interfaces RS485 interface CAN (2.0B up to 1Mbit/s) interface USB full speed (12Mbit/s) interface Step/Direction interface (optically isolated) 3 inputs for stop switches and home switch (+24V compatible) with programmable pull-up 2 general purpose inputs (+24V compatible) and 2 general purpose outputs (open collector) Incremental a/b/n encoder interface (TTL and open-collector signals supported directly) Safety features Shutdown input - driver will be disabled in hardware as long as this pin is left open or shorted to ground Separate supply voltage inputs for driver and digital logic - driver supply voltage may be switched off externally while supply for digital logic and therefore digital logic remains active Software TMCL: standalone operation or remote controlled operation, program memory (non volatile) for up to 2048 TMCL commands, and PC-based application development software TMCL-IDE available for free. Ready for CANopen Electrical and mechanical data Supply voltage: common supply voltages +12 V DC / +24 V DC / +48 V DC supported (+9 V… +51 V DC) Motor current: up to 2.8 A RMS (programmable) 0.55… 3.1Nm max. holding torque (depends on motor) With NEMA23 (57mm motor flange size) or NEMA24 (60mm motor flange size) stepper motor
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
2 
Brand: Trinamic
MPN: pd5721161
Categoría: Componentes eléctricos y electrónicos
The PANdrive™ PD-1161 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling. The PD-1161 includes a stepper motor, controller/driver electronics, and TRINAMICs sensOstep™ encoder. It can be used in many decentralized applications and has been designed for 0.55… 3.1Nm max. holding torque and 24V DC nominal supply voltage. With its high energy efficiency from TRINAMIC’s coolStep technology cost for power consumption is kept down. The TMCL™ firmware allows for standalone operation and direct mode. Motion controller Motion profile calculation in real-time On the fly alteration of motor parameters (e.g. position, velocity, acceleration) High performance microcontroller for overall system control and serial communication protocol handling Bipolar stepper motor driver Up to 256 microsteps per full step High-efficient operation, low power dissipation Dynamic current control Integrated protection stallGuard2 feature for stall detection coolStep feature for reduced power consumption and heat dissipation Encoder sensOstep magnetic encoder (max. 1024 positions per rotation) e.g. for step-loss detection under all operating conditions and positioning supervision Interfaces inputs for stop switches (left and right) and home switch 1 analog input 2 general purpose outputs (open collector with freewheeling diodes) USB, RS232, and RS485 communication interfaces Software TMCL: standalone operation or remote controlled operation, program memory (non volatile) for up to 2048 TMCL commands, and PC-based application development software TMCL-IDE available for free. Electrical and mechanical data Supply voltage: +24V DC nominal (10… 30V DC) Motor current: up to 2.8A RMS (programmable) 0.5… 3.1Nm max. holding torque (depends on motor) With NEMA23 (57mm motor flange size) or NEMA24 (60mm motor flange size) stepper motor
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
241.12 EUR
Trinamic Pd57-2-1161 - Hybrid Stepper Motor Nema 23, 2,8 A, 10 … 30 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5721161
Categoría: Componentes eléctricos y electrónicos
The PANdrive™ PD-1161 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling. The PD-1161 includes a stepper motor, controller/driver electronics, and TRINAMICs sensOstep™ encoder. It can be used in many decentralized applications and has been designed for 0.55… 3.1Nm max. holding torque and 24V DC nominal supply voltage. With its high energy efficiency from TRINAMIC’s coolStep technology cost for power consumption is kept down. The TMCL™ firmware allows for standalone operation and direct mode. Motion controller Motion profile calculation in real-time On the fly alteration of motor parameters (e.g. position, velocity, acceleration) High performance microcontroller for overall system control and serial communication protocol handling Bipolar stepper motor driver Up to 256 microsteps per full step High-efficient operation, low power dissipation Dynamic current control Integrated protection stallGuard2 feature for stall detection coolStep feature for reduced power consumption and heat dissipation Encoder sensOstep magnetic encoder (max. 1024 positions per rotation) e.g. for step-loss detection under all operating conditions and positioning supervision Interfaces inputs for stop switches (left and right) and home switch 1 analog input 2 general purpose outputs (open collector with freewheeling diodes) USB, RS232, and RS485 communication interfaces Software TMCL: standalone operation or remote controlled operation, program memory (non volatile) for up to 2048 TMCL commands, and PC-based application development software TMCL-IDE available for free. Electrical and mechanical data Supply voltage: +24V DC nominal (10… 30V DC) Motor current: up to 2.8A RMS (programmable) 0.5… 3.1Nm max. holding torque (depends on motor) With NEMA23 (57mm motor flange size) or NEMA24 (60mm motor flange size) stepper motor
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
3 
Brand: Trinamic
MPN: pd5721260tmcl
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
319.67 EUR
Trinamic Pd57-2-1260-tmcl - Hybrid Stepper Motor Nema 23, 2,8 A, 12 … 54 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5721260tmcl
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
4
Brand: Trinamic
MPN: pd5721260canopen
Categoría: Componentes eléctricos y electrónicos
El PD57/60-1260 es una solución completamente mecatrónica compuesta por un módulo de control del motor paso a paso TCM-1260 y un motor NEMA 23 o NEMA 24 (tamaño de brida de 57mm o 60mm). El firmware PD57/60-1260 CANopen® permite controlar el módulo a través del protocolo CANopen® utilizando el controlador de movimiento Trinamic TMC5160 y el controlador del motor. El control dinámico de la corriente y el funcionamiento silencioso, fluido y eficiente se combinan con las funciones de StealthCop™, DcStep™, StallGuard™ y CoolStep™.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
491.07 EUR
Trinamic Pd57-2-1260-can - Motor De Paso HÍbrido Nema 23, 2,8 A, 12 … 54 V Cc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5721260canopen
Categoría: Componentes eléctricos y electrónicos
El PD57/60-1260 es una solución completamente mecatrónica compuesta por un módulo de control del motor paso a paso TCM-1260 y un motor NEMA 23 o NEMA 24 (tamaño de brida de 57mm o 60mm). El firmware PD57/60-1260 CANopen® permite controlar el módulo a través del protocolo CANopen® utilizando el controlador de movimiento Trinamic TMC5160 y el controlador del motor. El control dinámico de la corriente y el funcionamiento silencioso, fluido y eficiente se combinan con las funciones de StealthCop™, DcStep™, StallGuard™ y CoolStep™.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
5
Brand: Trinamic
MPN: pd5711260canopen
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
188.11 EUR
Trinamic Pd57-1-1260-can - Hybrid Stepper Motor Nema 23, 2,8 A, 12 … 54 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5711260canopen
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
6
Brand: Trinamic
MPN: pd5711260tmcl
Categoría: Componentes eléctricos y electrónicos
El PD57/60-1260 es una solución mecatrónica completa que consta de un módulo de control paso a paso TMCM-1260 y un motor NEMA 23 o NEMA 24 (tamaño de brida de 57 o 60 mm). El firmware PD57/60-1260 CANopen® permite controlar el módulo a través del protocolo CANopen® haciendo uso del controlador de movimiento y controlador de motor Trinamic TMC5160. El control de corriente dinámico y el funcionamiento silencioso, suave y eficiente se combinan con las funciones StealthChop™, DcStep™, StallGuard™ y CoolStep™.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
324.26 EUR
Trinamic Pd57-1-1260-tmcl - Motor Paso A Paso Híbrido Nema 23, 2,8 A, 12 … 54 V
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd5711260tmcl
Categoría: Componentes eléctricos y electrónicos
El PD57/60-1260 es una solución mecatrónica completa que consta de un módulo de control paso a paso TMCM-1260 y un motor NEMA 23 o NEMA 24 (tamaño de brida de 57 o 60 mm). El firmware PD57/60-1260 CANopen® permite controlar el módulo a través del protocolo CANopen® haciendo uso del controlador de movimiento y controlador de motor Trinamic TMC5160. El control de corriente dinámico y el funcionamiento silencioso, suave y eficiente se combinan con las funciones StealthChop™, DcStep™, StallGuard™ y CoolStep™.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
7 ![]()
Brand: Trinamic
MPN: pd6031260tmcl
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
219.94 EUR
Trinamic Pd60-3-1260-tmcl - Hybrid Stepper Motor Nema 24, 2,8 A, 12 … 54 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd6031260tmcl
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
8 ![]()
Brand: Trinamic
MPN: pd6041260canopen
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
- Trinamic -
213.12 EUR
Trinamic Pd60-4-1260-can - Hybrid Stepper Motor Nema 24, 2,8 A, 12 … 54 V Dc
Reichelt.com
Transporte: 9.95 EUR
Brand: Trinamic
MPN: pd6041260canopen
Categoría: Componentes eléctricos y electrónicos
The PD57/60-1260 is a full mechatronic solution, made up of a TMCM-1260 stepper control module and a NEMA 23 or a NEMA 24 (57mm or 60mm flange size) motor. The PD57/60-1260 CANopen® firmware allows to control the module using the CANopen® protocol, making use of the Trinamic TMC5160 motion controller and motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop™, DcStep™, StallGuard™ and CoolStep™ features.
Compara precios desde:
Trinamic in Componentes eléctricos y electrónicos
