Performance | Ofertas Cuidado Del Cabello

Brand: Microchip
MPN: pic18f24k20isp
Categoría: Componentes eléctricos y electrónicos

PIC18F2XK20/4XK20 28/40/44-Pin Flash Microcontrollers with XLP Technology High-Performance RISC CPU • C Compiler Optimized Architecture: - Optional extended instruction set designed to optimize re-entrant code • Up to 1024 bytes Data EEPROM • Up to 64 Kbytes Linear Program Memory Addressing • Up to 3936 bytes Linear Data Memory Addressing • Up to 16 MIPS Operation • 16-bit Wide Instructions, 8-bit Wide Data Path • Priority Levels for Interrupts • 31-Level, Software Accessible Hardware Stack • 8 x 8 Single-Cycle Hardware Multiplier Special Microcontroller Features • Operating Voltage Range: 1.8V to 3.6V • Self-Programmable under Software Control • Programmable 16-Level High/Low-Voltage Detection (HLVD) module: - Interrupt on High/Low-Voltage Detection • Programmable Brown-out Reset (BOR): - With software enable option • Extended Watchdog Timer (WDT): - Programmable period from 4 ms to 131s • Single-Supply 3V In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins Flexible Oscillator Structure • Precision 16 MHz Internal Oscillator Block: - Factory calibrated to ± 1% - Software selectable frequencies range of 31 kHz to 16 MHz - 64 MHz performance available using PLL, no external components required • Four Crystal Modes up to 64 MHz • Two External Clock Modes up to 64 MHz • 4X Phase Lock Loop (PLL) • Secondary Oscillator using Timer1 @ 32 kHz • Fail-Safe Clock Monitor: - Allows for safe shutdown, if peripheral clock stops - Two-Speed Oscillator Start-up Extreme Low-Power Management with XLP • Sleep Mode: < 100 nA @ 1.8V • Watchdog Timer: < 800 nA @ 1.8V • Timer1 Oscillator: < 800 nA @ 32 kHz and 1.8V Analog Features • Analog-to-Digital Converter (ADC) Module: - 10-bit resolution, 13 External Channels - Auto-acquisition capability - Conversion available during Sleep - 1.2V Fixed Voltage Reference (FVR) channel - Independent input multiplexing • Analog Comparator Module: - Two rail-to-rail analog comparators - Independent input multiplexing • Voltage Reference (CVREF) Module - Programmable (% VDD), 16 steps - Two 16-level voltage ranges using VREF pins Peripheral Highlights • Up to 35 I/O Pins plus 1 Input-only Pin: - High-Current Sink/Source 25 mA/25 mA - Three programmable external interrupts - Four programmable interrupt-on-change - Eight programmable weak pull-ups - Programmable slew rate • Capture/Compare/PWM (CCP) Module • Enhanced CCP (ECCP) module: - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart • Master Synchronous Serial Port (MSSP) Module - 3-wire SPI (supports all four modes) - I2C™ Master and Slave modes with address mask • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module: - Supports RS-485, RS-232 and LIN - RS-232 operation using internal oscillator - Auto-Wake-up on Break - Auto-Baud Detect
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic12lf1501isn
Categoría: Componentes eléctricos y electrónicos

8-Pin Flash, 8-Bit Microcontrollers High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input, - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • Three External Clock modes up to 20 MHz Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC12LF1501) - 2.3V to 5.5V (PIC12F1501) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Low-Power Brown-out Reset (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • In-Circuit Debug (ICD) via Two Pins • Power-Saving Sleep mode: - Low-Power Sleep mode - Low-Power BOR (LPBOR) • Integrated Temperature Indicator • 128 Bytes High-Endurance Flash - 100,000 write Flash endurance (minimum) Memory: • 1 Kwords Linear Program Memory Addressing • 64 bytes Linear Data Memory Addressing • High-Endurance Flash Data Memory (HEF) - 128 bytes if nonvolatile data storage - 100k erase/write cycles eXtreme Low-Power (XLP) Features (PIC12LF1501): • Sleep Current: - 20 nA @ 1.8V, typical • Watchdog Timer Current: - 260 nA @ 1.8V, typical • Operating Current: - 30 µA/MHz @ 1.8V, typical Peripheral Features: • Analog-to-Digital Converter (ADC) • 5-Bit Digital-to-Analog Converter (DAC) • One Comparator • Voltage Reference: - 1.024V Fixed Voltage Reference (FVR) • Six I/O Pins (1 Input-only Pin) • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Four 10-bit PWM modules • Two Configurable Logic Cell (CLC) modules • Numerically Controlled Oscillator (NCO) • Complementary Waveform Generator (CWG):
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic16f1825ist
Categoría: Componentes eléctricos y electrónicos

PIC16F1825/9 , 14/20-Pin Flash Microcontrollers High-Performance RISC CPU • Only 49 Instructions to Learn: All single-cycle instructions except branches • Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle • Up to 16 Kbytes Linear Program Memory Addressing • Up to 1024 bytes Linear Data Memory Addressing • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Special Microcontroller Features • 1.8V-5.5V Operation – PIC16F1825/9 • 1.8V-3.6V Operation – PIC16LF1825/9 • Self-Programmable under Software Control • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Programmable Brown-out Reset (BOR) • Extended Watchdog Timer (WDT) • In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Programmable Code Protection • Power-Saving Sleep mode Flexible Oscillator Structure • Precision 32 MHz Internal Oscillator Block: - Factory calibrated to ± 1%, typical - Software selectable frequencies range of 31 kHz to 32 MHz • 31 kHz Low-Power Internal Oscillator • Four Crystal modes up to 32 MHz • Three External Clock modes up to 32 MHz • 4x Phase Lock Loop (PLL) • Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops • Two-Speed Oscillator Start-Up • Reference Clock Module: Programmable clock output frequency and duty cycle Analog Features • Analog-to-Digital Converter (ADC) Module: - 10-bit resolution, up to 12 channels - Auto acquisition capability - Conversion available during Sleep • Analog Comparator Module: - Two rail-to-rail analog comparators - Power mode control - Software controllable hysteresis • Voltage Reference Module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights • Up to 17 I/O Pins and 1 Input Only Pin: - High current sink/source 25 mA/25 mA - Programmable weak pull-ups - Programmable interrupt-on-change pins • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated, low-power 32 kHz oscillator driver • Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Two Capture, Compare, PWM (CCP) Modules • Two Enhanced CCP (ECCP) Modules: - Software selectable time bases - Auto-shutdown and auto-restart - PWM steering • Up to Two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module • mTouch™ Sensing Oscillator Module: Up to 12 input channels • Data Signal Modulator Module: Selectable...
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic12lf1501ip
Categoría: Componentes eléctricos y electrónicos

8-Pin Flash, 8-Bit Microcontrollers High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Operating Speed: - DC – 20 MHz clock input, - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • Three External Clock modes up to 20 MHz Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC12LF1501) - 2.3V to 5.5V (PIC12F1501) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Low-Power Brown-out Reset (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • In-Circuit Debug (ICD) via Two Pins • Power-Saving Sleep mode: - Low-Power Sleep mode - Low-Power BOR (LPBOR) • Integrated Temperature Indicator • 128 Bytes High-Endurance Flash - 100,000 write Flash endurance (minimum) Memory: • 1 Kwords Linear Program Memory Addressing • 64 bytes Linear Data Memory Addressing • High-Endurance Flash Data Memory (HEF) - 128 bytes if nonvolatile data storage - 100k erase/write cycles eXtreme Low-Power (XLP) Features (PIC12LF1501): • Sleep Current: - 20 nA @ 1.8V, typical • Watchdog Timer Current: - 260 nA @ 1.8V, typical • Operating Current: - 30 µA/MHz @ 1.8V, typical Peripheral Features: • Analog-to-Digital Converter (ADC) • 5-Bit Digital-to-Analog Converter (DAC) • One Comparator • Voltage Reference: - 1.024V Fixed Voltage Reference (FVR) • Six I/O Pins (1 Input-only Pin) • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Four 10-bit PWM modules • Two Configurable Logic Cell (CLC) modules • Numerically Controlled Oscillator (NCO) • Complementary Waveform Generator (CWG):
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic18f14q41ireb
Categoría: Componentes eléctricos y electrónicos

PIC18F04/05/06/14/15/16Q41, Low-Power, High-Performance Microcontroller with XLP Technology Description The PIC18-Q41 family of Microcontrollers (MCUs) combines sophisticated analog peripherals and powerful Core Independent Peripherals (CIPs) for small, high-performance data acquisition and sensor interfacing applications. Available in small 14- and 20-pin packages, these MCUs are equipped with an Operational Amplifier (OPA), a 12-bit Analog-to-Digital Converter with Computation (ADCC), and 8-bit Digital-to-Analog Converters (DACs) providing a high level of analog integration for amplification, filtering and signal conditioning. With our comprehensive development tool suite, you can easily configure peripherals and functions, generate application code and simulate analog circuits prior to hardware prototyping reducing your development time and time to market. PIC18-Q41 MCUs are well suited for IoT edge nodes, medical, wearables, LED lighting, home automation, automotive and industrial process control. If a cost-effective MCU with comparable performance is needed, PIC18-Q40 MCUs are a good option. Key Features • 64 MHz internal oscillator • Operational amplifier • 8-bit buffered DAC • 12-bit ADC with Computation (ADCC) • Hardware Capacitive Voltage Divider (CVD) for touch sensing applications • Two Analog comparators • Up to 64 KB Flash program memory • 512 B data EEPROM • Up to 4 KB data SRAM • Four Direct Memory Access (DMA) • Three 16-bit dual PWMs • Four Configurable Logic Cells (CLC) • 32-bit Cyclic Redundancy Check (CRC) for reliable data/program memory monitoring • Peripheral Pin Select (PPS) • Three UART (one UART supports LIN/DMX/DALI protocols), SPI, I²C interfaces
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: atmega164pv10pu
Categoría: Componentes eléctricos y electrónicos

ATmega164P/V/324P/V/644P/V , megaAVR® Features • High-performance, Low-power AVR® 8-bit Microcontroller • Advanced RISC Architecture - 131 Powerful Instructions – Most Single-clock Cycle Execution - 32 × 8 General Purpose Working Registers - Fully Static Operation - Up to 20 MIPS Throughput at 20 MHz - On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments - 16K/32K/64K Bytes of In-System Self-programmable Flash program memory - 512B/1K/2K Bytes EEPROM - 1K/2K/4K Bytes Internal SRAM - Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM - Data retention: 20 years at 85?C/100 years at 25?C(1) - Optional Boot Code Section with Independent Lock Bits - In-System Programming by On-chip Boot Program - True Read-While-Write Operation - Programming Lock for Software Security • JTAG (IEEE std. 1149.1 Compliant) Interface - Boundary-scan Capabilities According to the JTAG Standard - Extensive On-chip Debug Support - Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface • Peripheral Features - Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes - One 16-bit Timer/Counter with Separate Prescaler, Compare Mode + Capture Mode - Real Time Counter with Separate Oscillator - Six PWM Channels - 8-channel, 10-bit ADC: Differential mode with selectable gain at 1×, 10× or 200× - Byte-oriented Two-wire Serial Interface - Two Programmable Serial USART - Master/Slave SPI Serial Interface - Programmable Watchdog Timer with Separate On-chip Oscillator - On-chip Analog Comparator - Interrupt and Wake-up on Pin Change • Special Microcontroller Features - Power-on Reset and Programmable Brown-out Detection - Internal Calibrated RC Oscillator - External and Internal Interrupt Sources - Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages - 32 Programmable I/O Lines - 40-pin PDIP, 44-lead TQFP, 44-pad VQFN/QFN/MLF (ATmega164P/324P/644P) - 44-pad DRQFN (ATmega164P) • Operating Voltages - 1.8V - 5.5V for ATmega164PV/324PV/644PV - 2.7V - 5.5V for ATmega164P/324P/644P • Speed Grades - ATmega164PV/324PV/644PV: 0 - 4 MHz @ 1.8V - 5.5V, 0 - 10 MHz @ 2.7V - 5.5V - ATmega164P/324P/644P: 0 - 10 MHz @ 2.7V - 5.5V, 0 - 20 MHz @ 4.5V - 5.5V • Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164PV/324PV/644PV - Active: 0.4 mA - Power-down Mode: 0.1 µA - Power-save Mode: 0.6 µA (Including 32 kHz RTC)
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic16f1825isl
Categoría: Componentes eléctricos y electrónicos

PIC16F1825/9 , 14/20-Pin Flash Microcontrollers High-Performance RISC CPU • Only 49 Instructions to Learn: All single-cycle instructions except branches • Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle • Up to 16 Kbytes Linear Program Memory Addressing • Up to 1024 bytes Linear Data Memory Addressing • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Special Microcontroller Features • 1.8V-5.5V Operation – PIC16F1825/9 • 1.8V-3.6V Operation – PIC16LF1825/9 • Self-Programmable under Software Control • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Programmable Brown-out Reset (BOR) • Extended Watchdog Timer (WDT) • In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Programmable Code Protection • Power-Saving Sleep mode Flexible Oscillator Structure • Precision 32 MHz Internal Oscillator Block: - Factory calibrated to ± 1%, typical - Software selectable frequencies range of 31 kHz to 32 MHz • 31 kHz Low-Power Internal Oscillator • Four Crystal modes up to 32 MHz • Three External Clock modes up to 32 MHz • 4x Phase Lock Loop (PLL) • Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops • Two-Speed Oscillator Start-Up • Reference Clock Module: Programmable clock output frequency and duty cycle Analog Features • Analog-to-Digital Converter (ADC) Module: - 10-bit resolution, up to 12 channels - Auto acquisition capability - Conversion available during Sleep • Analog Comparator Module: - Two rail-to-rail analog comparators - Power mode control - Software controllable hysteresis • Voltage Reference Module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights • Up to 17 I/O Pins and 1 Input Only Pin: - High current sink/source 25 mA/25 mA - Programmable weak pull-ups - Programmable interrupt-on-change pins • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated, low-power 32 kHz oscillator driver • Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Two Capture, Compare, PWM (CCP) Modules • Two Enhanced CCP (ECCP) Modules: - Software selectable time bases - Auto-shutdown and auto-restart - PWM steering • Up to Two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module • mTouch™ Sensing Oscillator Module: Up to 12 input channels • Data Signal Modulator Module: Selectable...
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic10f202ep
Categoría: Componentes eléctricos y electrónicos

Microchip PIC-Controller - High-Performance RISC CPU Microchip unterstützt die komplette Performance-Range von 8-bit, 16-bit und 32-bit Microcontrollern mit einer mächtigen Architektur, flexiblen Speicher-Technologien und umfangreichen einfach zu bedienenden Entwicklungstools sowie kompletter technischer Dokumentation. Die Vorteile der Microchip Microcontroller-Lösungen liegen dabei auf der Hand: • Alle PIC® MCUs und dsPIC® DSCs bieten die Auf- und Abwärts-Skalierung Ihrer Design-Projekte • Die aufwärts kompatible Architektur sichert Ihr Investment in Code-Development • Leichter Wechsel zwischen 8, 16 und 32-bit Familien • Pin-Kompatibilität zwischen den Gehäusevarianten • Low-Risk Produkt Entwicklung · schnelle Time-To-Market Zyklen · niedrige Gesamt-Systemkosten. • Viele Controller werden schon mit einer Reihe interessanter Funktionalitäten ausgeliefert • Analoge und digitale Peripherie kann mit einem minimalen Komponentenaufwand integriert werden
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: atmega1284pau
Categoría: Componentes eléctricos y electrónicos

ATmega1284P Description: The high-performance Microchip 8-bit AVR RISC-based microcontroller combines 128KB ISP flash memory with read-while-write capabilities, 4KB EEPROM, 16KB SRAM, 32 general purpose I/O lines, 32 general purpose working registers, a real time counter, three flexible timer/counters with compare modes and PWM, two USARTs, a byte oriented 2-wire serial interface, an 8-channel 10-bit A/D converter with optional differential input stage with programmable gain, programmable watchdog timer with internal oscillator, SPI serial port, a JTAG (IEEE 1149.1 compliant) test interface for on-chip debugging and programming, and six software selectable power saving modes. The device operates between 1.8-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed. Features: • Program Memory Type: Flash • Program Memory Size (KB): 128 • CPU Speed (MIPS/DMIPS): 20 • SRAM (B): 16,384 • Data EEPROM/HEF (bytes): 4096 • Digital Communication Peripherals: 2-UART, 3-SPI, 1-I2C • Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 6PWM • Timers: 2 x 8-bit, 2 x 16-bit • Number of Comparators: 1 • Temperature Range (°C): -40 to 85 • Operating Voltage Range (V): 1.8 to 5.5 • Pin Count: 40-pin PDIP, 44-lead TQFP • Low Power: Yes
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: pic18f45k22ipt
Categoría: Componentes eléctricos y electrónicos

PIC18(L)F2X/4XK22 High-Performance RISC CPU: • C Compiler Optimized Architecture: Optional extended instruction set designed to optimize re-entrant code • Up to 1024 Bytes Data EEPROM • Up to 64 Kbytes Linear Program Memory Addressing • Up to 3896 Bytes Linear Data Memory Addressing • Up to 16 MIPS Operation • 16-bit Wide Instructions, 8-bit Wide Data Path • Priority Levels for Interrupts • 31-Level, Software Accessible Hardware Stack • 8 x 8 Single-Cycle Hardware Multiplier Flexible Oscillator Structure: • Precision 16 MHz Internal Oscillator Block: - Factory calibrated to ± 1% - Selectable frequencies, 31 kHz to 16 MHz - 64 MHz performance available using PLL – no external components required • Four Crystal modes up to 64 MHz • Two External Clock modes up to 64 MHz • 4X Phase Lock Loop (PLL) • Secondary Oscillator using Timer1 @ 32 kHz • Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops - Two-Speed Oscillator Start-up Analog Features: • Analog-to-Digital Converter (ADC) module: - 10-bit resolution, up to 30 external channels - Auto-acquisition capability - Conversion available during Sleep - Fixed Voltage Reference (FVR) channel - Independent input multiplexing • Analog Comparator module: - Two rail-to-rail analog comparators - Independent input multiplexing • Digital-to-Analog Converter (DAC) module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection • Charge Time Measurement Unit (CTMU) module: - Supports capacitive touch sensing for touch screens and capacitive switches eXtreme Low-Power Features (XLP) (PIC18(L)F2X/4XK22): • Sleep mode: 20 nA, typical • Watchdog Timer: 300 nA, typical • Timer1 Oscillator: 800 nA @ 32 kHz • Peripheral Module Disable Special Microcontroller Features: • 2.3V to 5.5V Operation – PIC18FXXK22 devices • 1.8V to 3.6V Operation – PIC18LFXXK22 devices • Self-Programmable under Software Control • High/Low-Voltage Detection (HLVD) module: - Programmable 16-Level - Interrupt on High/Low-Voltage Detection • Programmable Brown-out Reset (BOR): - With software enable option - Configurable shutdown in Sleep • Extended Watchdog Timer (WDT): Programmable period from 4 ms to 131s • In-Circuit Serial Programming™ (ICSP™): Single-Supply 3V • In-Circuit Debug (ICD) Peripheral Highlights: • Up to 35 I/O Pins plus 1 Input-Only Pin: - High-Current Sink/Source 25 mA/25 mA - Three programmable external interrupts - Four programmable interrupt-on-change - Nine programmable weak pull-ups - Programmable slew rate • SR Latch: Multiple Set/Reset input options • Two Capture/Compare/PWM (CCP) modules • Three Enhanced CCP (ECCP) modules: - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-Shutdown and Auto-Restart - PWM steering • Two Master Synchronous Serial Port (MSSP) modules: - 3-wire SPI (supports all 4 modes) - I2C Master and Slave modes with address mask • Two Enhanced...
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: at30tk175stk
Categoría: Componentes eléctricos y electrónicos

The AT30TK175STK is a development tool for applications that require accurate, real-time temperature monitoring to improve product safety and reliability, improve system performance, and reduce the risk of system overheating. The starter kit utilizes the AT30TK175 daughterboard to allow users to experiment and develop with the Atmel AT30TSE002B, AT30TS75, AT30TS750, and AT30TSE758 digital temperature sensors. The AT30TK175 daughterboard interfaces to the AT88Microbase board (included in the kit) to provide communication to a PC via a USB interface allowing designers to learn and experiment with the temperature sensor demonstration utility. In addition, this kit supports a modular approach, enabling the AT30TK175 daughterboard to connect directly to an STK series AVR development platform to easily add temperature monitoring to applications. Features • Four digital temperature sensor devices: - Atmel® AT30TSE002B - Atmel AT30TS75 - Atmel AT30TS750 - Atmel AT30TSE758 • Four event LEDs • Four alarm status LEDs: Critical, high, low, and normal • Software switchable VCC: 3.3V, 5.0V, and OFF • Power LED Contents • One Atmel AT30TK175 adapter board • One Atmel AT88Microbase AVR® base module • 6-inch USB cable • 18-inch extension cable
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Microchip
MPN: ac102015
Categoría: Componentes eléctricos y electrónicos

AC102015 - Tarjeta Adaptadora, MPLAB ICD 4/PICkit 4 depurador a Atmel-ICE/Performance Debugger/J-Link La tarjeta adaptadora del depurador es una tarjeta de conectividad que proporciona la compatibilidad del cable del depurador MPLAB ICD 4 + MPLAB PICkit 4 con los conectores Atmel-ICE, Power Debugger + Segger J-Link. Soporta protocolos JTAG, SWD + ICSP en varios formatos de conector. Es útil para depurar las placas de demostración AVR Xplained más antiguas con los depuradores MPLAB PICkit 4. Nota: Utilice el AC164100 (adaptador RJ-11 a ICSP) para convertir entre conectores RJ11 (MPLAB ICD 4) + 1x6 100 mil SIP ICSP (MPLAB PICkit 4). Características del producto - RJ11/45 (compatible con MPLAB ICD 4 ICSP/JTAG) - 1x8 - 100 mil ICSP (compatible con MPLAB PICkit 4 ICSP) - 2x10 - 100 mil DIP (compatible con SEGGGER J-LINK JTAG SWD) - 2x7 - 100 mil DIP (compatible con SEGGGER J-LINK EJTAG) - 2x5 - 50 mil (compatible con Atmel-ICE y Power Debugger JTAG SWD) - 2x5 - 50 mil (compatible con Atmel-ICE y Power Debugger AVR JTAG) - Conectividad MPLAB ICD 4/MPLAB PICkit 4 a conector ICSP pequeño (1x6 o 1x8 - 50 mil SIP ICSP/JTAG)
Compara precios desde:
Microchip in Componentes eléctricos y electrónicos

Brand: Lego Technic
EAN: 5702017600864
Categoría: Categoría > Juegos de Construcción

Compara precios desde:
Lego Technic in Categoría > Juegos de Construcción

Brand: Compex
EAN: 888912000246

Brand: Compex
EAN: 888912000253

Brand: Compressport
EAN: 7630102514186

Brand: Compressport
EAN: 7630102514223

Brand: Compressport
EAN: 7630102514360

Brand: Compressport
EAN: 7630102514407

Brand: Compressport
EAN: 7630102544671

Brand: Tols
EAN: 8436577115809

Brand: Xilence
EAN: 4044953500213

Brand: Xilence
EAN: 4044953500237

Brand: Xilence
EAN: 4044953503023

Brand: Carrera
EAN: 4007486625488

Brand: Xilence
EAN: 4044953502095

Brand: Xilence
EAN: 4044953503016

Brand: Xilence
EAN: 4044953502071

Brand: Nemesis now
EAN: 0801269141134

Brand: Xilence
EAN: 4044953502897

Brand: Xilence
EAN: 4044953502958

Brand: Xilence
EAN: 4044953502675

Brand: Xilence
EAN: 4044953502699

Brand: Xilence
EAN: 4044953503221

Brand: Xilence
EAN: 4044953502934

Brand: Xilence
EAN: 4044953502118